Unit 1 Block C Athy Business Campus, Kilkenny Road, Athy

Replacement (“restringing”) and uprating of c.8.89km section of the conductor along the existing Athy - Carlow 110 kV OHL circuit; - Provision of fibre communication connection on the uprated circuit; - Replacement of 11No. existing Intermediate Wooden Polesets, with similar structures. The replacement of these structures will result in standardised heights from 16m to 24m, with height increases between 1m and 3m; - Replacement of 12No. existing intermediate Wooden Polesets crossarms; - Recapping works on shear blocks at 1No. existing steel angle mast; - Foundation strengthening of 1No. existing steel angle mast; - Bar member replacements to 8No. existing steel angle masts; - Separation of the existing double OHL circuit to provide for a new bypass OHL section measuring approximately 422m, connecting from the existing Athy 110 kV substation to the following proposed new structures on the existing Athy - Portlaoise 110 kV OHL: 2no. new single circuit angle masts (approximately 22.5m maximum height) and 1no. new wooden poleset (approximately 23.6m maximum height); and, - All associated works/development to existing structures, including hardware replacement (strain clamps, suspension clamps and vibration dampers), replacement of step bolts, replacement of line identification and danger notices, painting of angle masts, replacement/installation of anti-climbing guards, access tracks, vegetation clearance, temporary construction compounds and all other works necessary to facilitate the development

the extension & alteration of the existing Canteen Building to include the following, (i) demolition of existing Single Storey Annex (6m2), (ii) construction of a new changing room, locker area, WC’s and Universal WC (51m2), with (iii) Internal alterations and elevational upgrades, and all associated site development works

the upgrade of part of the existing production building to include the following (i) removal of part of the existing roof and wall cladding and associated structure (139m2) (ii) erection of new structure and cladding within the production building (139m2) to cover the existing floor area and to allow for an increase in height within the facility to a maximum eaves height of 16.85m and a maximum ridge height of 18.59m and all associated site development works

for a 70 sq.m side extension to Industrial Unit 10 to form an Electric Vehicle Service Centre, ancillary alterations to front & side elevations, surface water to soakaways and all associated site works

for change of use from childcare facility to delicatessen at ground floor, timber-built extension to front and signage

to construct 4 no. 3 bedroom townhouse style dwellings, form connections to public services including foul water sewer, surface water sewer and watermains, together with all associated site works, including replacement of 2 no. existing trees located in grass margin fronting the site